Basic Guide to Finding Hidden Valves and Piping
Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.
In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. A second valve is usually located further down the line or where the gas pipe first enters.
Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.
If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.
Automatic valves for your sprinkler system may in most cases be located underground and are usually harder to find as you read more from this website. For such valves using a metal detector may come in handy since they are usually metallic in nature. If you use a plan to find the valves then you are sure that you are able to easily know where to start.